RCFoam is no longer in operation.

This website is maintained as reference material and a reminder
of a time before tech monopolies ruined the internet
and coronavirus ruined everything else.
Depron and EPP Foam Suppliers, Carbon Fiber Sheets, Carbon Rods and Tubes, RC Model Airplane Engines, Lipo Batteries

You are here: Home > Airplane Kits > 3DXHobbies > Airfoilz Katana NX

Airfoilz Katana NX

Airfoilz Katana NX with Graphics


Airfoilz Katana NX

Discontinued Model


Out Of Stock - Check back soon or join our waitlist!
Incorporating the new NX, carbon reinforced, profile fuselage design, the legendary symmetrically airfoiled Airfoilz wing, and strategically placed balsa reinforcements, the Katana NX combines light weight with an extremely rigid airframe. Like all Airfoilz planes, the Katana NX is designed for all out performance and is capable of being flown in 25 MPH+ winds. While not indestructible, the Katana NX can take a beating, but if a mishap should occur, is generally easily repairable. The easy to assemble kit is complete with all needed hardware and printed vinyl graphics. So if you are looking to experience a new level of 3D performance, the new Airfoilz Katana NX is for you.

Wing Span: 40 in (1016 mm)
Overall Length: 36.6 in (927 mm)
Wing Area: 362 sq in (23.4 sq dm)
Flying Weight: 19-21 oz (538/595 g)
Motor Size: 180 to 275 Watts (1300 KVA, 56 gram motor recommended for top performance)
Recommended Battery: 3-cell11.1V 1500 to 2100 mAh
Radio: 6 channels for proper mixing
Servos: 4 sub-micro servos
Type: Outdoor Aerobatic/3D Flyer
Approx. Assembly Time: 8 to 10 hours

Pre-folded and glued depron wing skins
Balsa "I" Beam Wing Spar for exceptional strength and rigidity
Routered fuselage halves including cutouts for wing, horizontal and vertical stab, and servo openings
Carbon fiber and balsa fuselage spars
Bent wire landing gear
High quality printed vinyl graphics
Full hardware package including control horns, carbon fiber pushrods and nylon clevises
2" diameter Lite wheels
All parts CAD designed and CNC Laser or CNC router cut
Rudder and elevator servo wires routed through fuselage for a clean look
Screw mounts for servos
CD Step by Step Instruction Manual

What you need to complete:
Brushless Motor and ESC
4- Micro servos 9-12gram
1500 to 2200 lipo 11.1volt Battery
Foam Safe Glue or 15min Epoxy
Transmitter and Receiver

For more information, specifications, pictures, build logs and more, Click Here!

Review Summary

This product is covered by our limited warranty policy. We stand behind our products and all items are guaranteed to be in working order and fully functional. Any items found to be defective upon arrival will be repaired or replaced free of charge within 60 days of purchase.

Returns or exchanges of new and unused products will also be accepted up to 60 days after the date of purchase.