RCFoam is no longer in operation.

This website is maintained as reference material and a reminder
of a time before tech monopolies ruined the internet
and coronavirus ruined everything else.
Depron and EPP Foam Suppliers, Carbon Fiber Sheets, Carbon Rods and Tubes, RC Model Airplane Engines, Lipo Batteries

You are here: Home > Motors and Mounts > Brushless Outrunner Motor - Turnigy Park480 1020kv

Brushless Outrunner Motor - Turnigy Park480 1020kv

Brushless Outrunner Motor - Turnigy Park480 1020kv


Brushless Outrunner Motor - Turnigy Park480 1020kv



Out Of Stock - Check back soon or join our waitlist!
Designed to provide reliable and clean power for 3D parkflyers. This brushless outrunner will provide more power and with its high efficiency, long run times. A quality motor, built specifically for planes designed to fly with a 250 watts brushless outrunner.

Battery: 2~3 Cell /7.4~11.1V
RPM: 1020kv
Max current: 22A
No load current: 8V/1.1A
Current capacity: 28A/15sec
Internal resistance: 0.06 ohm
Weight: 81g (not including connectors)
Diameter of shaft: 4mm Dimensions: 51x35mm Required; 40A ESC 2S~3S Li-Po / 6 ~ 10-cell Ni-MH/Ni-Cd 10x7 ~ 12x6 prop Suitable for sport and scale airplanes weighing 20 to 30 ounces (565�850g).

Review Summary

This product is covered by our limited warranty policy. We stand behind our products and all items are guaranteed to be in working order and fully functional. Any items found to be defective upon arrival will be repaired or replaced free of charge within 60 days of purchase.

Returns or exchanges of new and unused products will also be accepted up to 60 days after the date of purchase.