Works great with:
o DEPRON
o BLUECOR
o CELLFOAM
o ELAPOR STYLE FOAM
o STYROFOAM
IT'S NOT CA (cyanoacrylate) - At the heart of the glue is a high quality resin that creates a permanent bond between the two surfaces.
Beacon's 3-in-1 Glue - 2 ounce bottle:
o Won't glue your fingers together.
o Won't leave a white haze on the surface.
o Won't require kicker or accelerator.
o Won't leave a brittle joint.
o Won't foam up.
o Always dries clear.
LESS IS MORE
Simply apply a very thin amount of Beacon 3-in-1 Glue to one side of the joint and gently press together. Pull the joint apart then press together again. That's it. You don't have to wait for the glue to get tacky. The glue sets in about 20 minutes and the bond will increase over time.
VALUE
The large 4oz bottle goes a long way, and at a lower price per ounce than other glues so you can't go wrong.
SORRY! FAA REGULATIONS PROHIBIT THIS PRODUCT FROM BEING SHIPPED OUTSIDE THE CONTINENTAL UNITED STATES. IT CAN BE SENT TO AREAS OF CANADA WHERE GROUND SHIPPING IS AVAILABLE. PLEASE CONTACT US IF YOU HAVE QUESTIONS REGARDING THIS ISSUE.